Sensors/electronic plug connectors

Reliably measure temperature and pressure in applications with temperatures from -75 °C to 250 °C.

Electronic module with analog connections

Electronic module with one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output. Available as …

Order number: 8900100

Details
This accessory is suitable for:
Electronic module

Electronic module with analog connections (Input, Output, Standby-In).

Note: Simultaneous use of bypass (accessory 8980780) and electronic insert is not possible without additional adaptation on the …

Order number: 8900105

Details
This accessory is suitable for:
Pt100 Supplementary module

Modul with Pt100 interface socket for 2. external Pt100 sensors.

Order number: 8900106

This accessory is suitable for:
PRESTO A80 PRESTO W80 PRESTO A80t PRESTO W80t PRESTO A85 PRESTO A85t PRESTO W85 PRESTO W85t PRESTO W91 PRESTO W91tt PRESTO W91x PRESTO W92 PRESTO W92tt PRESTO W92x PRESTO W92ttx PRESTO W55 PRESTO A45t PRESTO W40 PRESTO A45 PRESTO A40 PRESTO W50 PRESTO W50t PRESTO W93 PRESTO W93x PRESTO A70 PRESTO A41 PRESTO W41 PRESTO A38 PRESTO W56 PRESTO W56x PRESTO W91ttx PRESTO W58x
Additional products
USB to Serial RS-232 DB9 Adapter Cable

The USB Interface Adapter Cable (2.5 m) allows to connect JULABO instruments with RS232 interface to a PC with USB port.Included in delivery: USB Interface Cable RS232 9 pin USB Typ A, CD with driver …

Order number: 8900110

Details
This accessory is suitable for:
Additional products
SCB Converter Box

The SCB converter box converts the signal of the Stakei output (200-230V 50/60Hz) into a potential-free contact (3-pole). The article is only suitable for communication with the booster pump (8810020). …

Order number: 8980024

Details
This accessory is suitable for:
RJ45 cable

RJ45 cable, length 5 m.

Order number: 8980071

This accessory is suitable for:
RS232 interface cable

RS232 interface cable, length 2,5 m. Interface cable RS232 9-pole/9-pole.

Order number: 8980073

This accessory is suitable for:
Additional products
RS232 interface cable

RS232 interface cable, length 5 m. Interface cable RS232 9-pole/9-pole.

Order number: 8980074

This accessory is suitable for:
Additional products
RS232 interface cable

RS232 interface cable, length 3 m.

Order number: 8980075

This accessory is suitable for:
Extension cable

Extension cable 5 m, from control electronics to Forte HT Circulator.

Order number: 8980125

This accessory is suitable for:
External Pt100 connector

External Pt100 connector

Order number: 8980131

This accessory is suitable for:
Additional products
Standby-plug 3 pole

External input, for an external shutoff switch, for example. In combination with analogoption 8900100 including PrestoPlus, Magnum91, Forte HT. Semichiller with Pro Option “3“.

Order number: 8980133

This accessory is suitable for:
Additional products
DIN-connector

DIN connector according to DIN 45321, plug-in compatible to IEC 60130-9. For signal and low load currents up to 4 A.

E.g. for the connection of flow meters

Order number: 8980134

This accessory is suitable for:
PRESTO W55
PRESTO W93 PRESTO W93x
Additional products
Alarmplug 5 pole

Alarmplug 5 pole.

AT MAGIO MS, MAGIO MX, DYNEO DD,HE, SE, HL, SL, CF41, CF41, SL-8K, SL-14K, FK30-SL, FK31-SL only in combination with electronic module with analog connections. Semichiller SC with Pro …

Order number: 8980135

Details
This accessory is suitable for:
CF41
Additional products
REG EPROG-plug 6 pole

SE, HL, SL, CF31, CF41, and calibration baths in combination with analogoption 8900100. Presto A30/x40 in combination with analogoption 8900105. Semichiller with Pro Option “3“.

Order number: 8980136

This accessory is suitable for:
Additional products
Stakei Plug

Stakei Plug

Order number: 8980137

This accessory is suitable for:
Additional products
Y-adapter

Y-adapter cable for connecting 1 dual Pt100 sensor to 2 Lemosa sockets for LC Temperature Laboratory Controller.

Order number: 8980142

This accessory is suitable for:
Extension cable

3.5 m Extension cable for Pt100 sensor, Lemosa-type.

Order number: 8981103

This accessory is suitable for:
FT402 FT902 FT903
Additional products
Electronic module with analog connections

Electronic module with one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output.

Order number: 9900100

This accessory is suitable for:
USB Cable

USB Cable 2m, Type A-B

Order number: 9900110

This accessory is suitable for:
USB 2.0 Repeater

USB 2.0 Repeater extension cable, length 5m

Order number: 9900112

This accessory is suitable for:
USB 2.0 Repeater

USB 2.0 Repeater-Cable, Length 10m

Order number: 9900114

This accessory is suitable for:
Pressure sensor

Pressure sensor, 2 fittings M24x1.5 male (-95 ... +250 °C).

Order number: 8980771

This accessory is suitable for:
Pressure sensor

Pressure sensor 8980772, 2 fittings M30x1.5 male (-95 ... +250 °C)

Order number: 8980772

This accessory is suitable for:
PRESTO W55
Pressure sensor

Pressure sensor 8980773, 2 fittings M38x1.5 male (-95 ... +250 °C)

Order number: 8980773

This accessory is suitable for:
PRESTO W93 PRESTO W93x
M+R in-line Pt100 sensor

M+R in-line Pt100 sensor, 1.5 m cable (measurement and control in external system). Stainless steel sensor. Connection via M16 x 1 male.

Order number: 8981020

This accessory is suitable for:
Additional products
M+R in-line Pt100 sensor

M+R in-line Pt100 sensor, 2 fittings M24x1.5 male, 1.5 m cable.

Order number: 8981021

This accessory is suitable for:
M+R Adapter with Pt100 M30x1.5

M+R in-line Pt100 sensor, 2 fitting M30x1.5 male, 1.5 m cabel

Order number: 8981022

This accessory is suitable for:
PRESTO W55
M+R Adapter with Pt100 M38x1.5

M+R in-line Pt100 sensor, 2 fitting M38x1.5 male, 1.5 m cabel

Order number: 8981023

This accessory is suitable for:
Precision reference sensor, stainless steel

Precision reference sensor with integrated measuring electronics and RS232 connection for direct use with all JULABO calibration baths. Measuring range -40.00…+300 °C, dimensions 180 x 4 mm, 1 m …

Order number: 8981002

Details
This accessory is suitable for:
External Pt100 sensor

External Pt100 sensor, 200 x 6 mm, diameter, stainless steel, 1.5 m cable.

Order number: 8981003

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor, 20 x 2 mm, stainless steel, 1,5 m cable

Order number: 8981006

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor, 300 x 6 mm, diameter, stainless steel, 1.5 m cable.

Order number: 8981010

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor, 600 x 6 mm, stainless steel/PTFE coated, 3 m cable.

Order number: 8981013

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor, 1200 x 6 mm, stainless steel/PTFE coated, 3 m cable.

Order number: 8981014

This accessory is suitable for:
FT402 FT902 FT903 PRESTO W93 PRESTO W93x
Additional products
External Pt100 sensor

External Pt100 sensor, 300 x 6 mm, stainless steel/PTFE coated, 3 m cable. Usable for working temperatures from -75 °C to 250 °C. Without handle.

Order number: 8981015

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor, 900 x 6 mm, stainless steel/PTFE coated, 3 m cable. Usable for working temperatures from -75 °C to 250 °C. Without handle.

Order number: 8981016

This accessory is suitable for:
FT402 FT902 FT903
Additional products
External Pt100 sensor

External Pt100 sensor 200 x 6 mm, stainless steel/PTFE coated, 3 m cable. Usable for working temperatures from -75 …+250 °C. Without handle.

Order number: 8981017

This accessory is suitable for:
FT402 FT902 FT903
Additional products